The pre-designed "Room with a View" enclosure is a popular option for anyone creating a fun outdoor space for your cat(s) against an exterior window or door. The enclosure is open on one side with 6-inch width "lips" of mesh that surround the open side to give a flat surface to connect to the building/home with included hardware. It measures 46"D x 46"L x 92"H and features kitty-safe cedar shelves and floor.
Three-sided enclosures feature top, bottom, left, right, and front sections entirely enclosed with wire mesh. The side which will connect to a building will be left open except for a 6" lip all the way around for fastening.
On the Room with a View series, you are able to select which way you would like the door to be positioned to best suit your needs. Using the diagram below be sure to select the door position you would like. Currently, these are the only two-door positions available without additional costs associated with customizing the enclosure. If you would like an alternative door position, you are welcome to build your own kit or work with our team to design one on your behalf!
Please review the important information below about this item.
Our enclosures are made from durable galvanized steel mesh panels that are then powder coated black to ensure a long-lasting weatherproof finish.
Floor and Shelves
Our shelves and floor are cut to size and made from cedar which is naturally resistant to water, bugs, rot, and mold. It the ideal material choice for outdoor catio shelving and flooring.
Human Entry Doors
The access doors are 2 feet wide and 5 feet tall. This purposely small door is designed small for a reason. It is installed 4 inches off the ground as well. The door has been tested since 2003 as the most effective way to force the person entering to be mindful of their surroundings. When you enter a door like this, you will naturally be careful of where you step, what is above you and to the side. All of this awareness has proven time and time again to minimize any would-be kitty escapes during entry.
Holes for Tunnels, Towers, Stairs, etc.
Component holes are not cut where the tunnels, bridges, stairs, and other components meet the enclosures. Since the mesh is relatively easy to cut on-site during assembly, we leave the choice on where these holes are located up to you so you can position them as you see fit. This also avoids costly mistakes being made and/or accomadates site issues discovered during assembly
Enclosures will arrive partially assembled and flat packed on a pallet. Assembly is straightforward for anyone who would consider themselves "handy." Paper instructions will be provided. It is recommended that at least two reasonably healthy people are present to install the enclosures. Knowledge of basic carpentry and assembly are helpful.
Clips will be provided that secure the enclosure togther. In addition, a special tool for snugly fitting/closing the clips is also provided with each enclosure order.
Once unpacked, you will arrange your enclosure near or on the assembly site. Using provided 3 prong clips and specialty pliers, you will connect the edges of your enclosure by setting the edges until you have a fully enclosed and free-standing enclosure.
At that point you can then attached to structure/buildings as necssary. Then you can create any needed holes in the enclosure to accept tunnels, stairs, or other accessory components as needed (holes are not made by Habitat Haven - they are made during assembly installation to offer maximum flexibility and minimize the chance for errors.)
This item is made to order. This means the item is fabricated by hand just for you. It goes through an array of steps before it becomes ready to ship. This process generally takes 4-6 weeks. In some cases it may be ready in a shorter amount of time and we will do our best to get it to you as fast as we can without comprimizing quality! You will be notified via email when your order is ready to ship!
Each component that we make is designed and created by hand in our shop in Michigan. We fabricate each enclosure, tunnel, tower, and stair to the highest standards.
Our materials have been thoroughly tested in thousands of applications since 2003 to ensure we offer the most flexible, attractive, and durable pet-safe enclosures available today.
Each component goes through an 8-point inspection to ensure that it meets our expectations and yours. It does not leave our shop until we would be willing to let our own kitties enjoy it.
We use galvanized steel mesh that is set in a 2” x 2” grid pattern that is then powder coated for added beauty and durability.
Habitat Haven products feature cedar wood for its stunning natural look and feel. It also naturally resists bugs and decay, perfect for outdoor applications.
Most of our items ship specially flat-packed and partially assembled via freight carrier (on a wooden pallet) to provide the highest level of security and to minimize the occurrence of shipping damage.